Well windows is quite straightforward when it comes to fixing up an ip address ... Linux is even more :)
open the file /etc/network/interfaces with sudo privileges in text editor and then edit accordingly
$ sudo gedit /etc/network/interfaces
Now copy paste the following :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static # (specify the interface, eth0 is the default ethernet, static tells that the ip address is static)
address 10.108.10.131 #(ip address you want to configure)
netmask 255.255.255.0 #(the subnet mask if any)
network 10.108.10.0 #(the network mask, optional)
broadcast 10.108.10.255 #(the broadcast adress, optional )
gateway 10.108.10.2 #( the default gateway )
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 144.16.192.55 # (the dns server address)
Now this configuration can be done for iface wlan0 in case of a wireless connection...
Now issue the following commands at terminal :
$ sudo ifdown eth0
$ sudo ifup eth0
$sudo ifconfig : to check the new ip address
this resets the ethernet and sets the static ip specified.
for Dynamic ip setting via DHCP, just give the command :
$ sudo dhclient
This would search for DHCP servers on all configured interfaces and set the ip addresses automatically if any found.
Tuesday, 12 January 2010
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment